Teledyne LeCroy T3DSO1204 Oscilloscope, 4 Channel, 200 MHz

Description

Untitled Document
Teledyne LeCroy T3DSO1204 Oscilloscope, 4 Channel, 200 MHz
Model:
T3DSO1204
| Order No:
T3DSO1204
Featuring a four-channel, 200 MHz bandwidth module with a 1 GSa/s maximum sample rate. It offers and supports multiple powerful triggering modes including serial bus triggering, along with serial bus decoding for IIC, SPI, UART, CAN, LIN bus types. Includes History waveform recording and sequential triggering that enable extended waveform recording and analysis.
Brand:
Teledyne LeCroy
Model:
T3DSO1204
Order No:
T3DSO1204
Condition:
NEW
Description
Teledyne LeCroy T3DSO1204 Oscilloscope, 4 Channel, 200 MHz
Teledyne LeCroy T3DSO1204 Offers
A high speed display technology that provides excellent signal clarity, fidelity and performance, with a low system noise floor. It comes with a minimum vertical input range of 500 uV/div, an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 400,000 frames/ sec (sequence mode). It also employs a 256-level intensity grading display function and a color temperature display mode.
Features
Four channel with a bandwidth of 200 MHz
Two 1 GSa/s ADC - when all channels are enabled, each channel has a maximum sample rate of 500 MSa/s, and when a single channel per ADC is active, it has sample rate of 1 GSa/s
Long Capture – 7 Mpts/Ch and 14 Mpts interleaved
Waveform Sequence Recorder – record and play back up to 80,000 waveforms
High speed display technology:
Waveform capture rate up to 100,000 wfm/s (normal mode), and 400,000 wfm/s (sequence mode)
Supports 256-level intensity grading and color display modes Record length up to 14 Mpts
Digital trigger system
Intelligent trigger: edge, slope, pulse width, window, runt, interval, time out (dropout), pattern
Serial bus triggering and decoding (Standard), supports protocols IIC, SPI, UART, RS232, CAN, LIN
Video trigger, supports HDTV
Low background noise with voltage scales from 500 μV/div to 10 V/div
10 one-button operation keys: Auto Setup, Default, Cursors, Measure, Roll, History, Display/Persist, Clear Sweep, Zoom and Print Segmented acquisition (Sequence) mode
Divides the maximum record length into multiple segments (up to 80,000), according to trigger conditions set by the user, with a very small dead time segment to capture the qualifying event
History waveform record (History) function, maximum recorded waveform length is 80,000 frames
Automatic measurement function for 38 parameters as well as Measurement Statistics, Zoom, Gating, Math, History and Reference functions
1 Mpts FFT
Math and measurement functions use all sampled data points (up to 14 Mpts)
Math functions (FFT, addition, subtraction, multiplication, division, integration, differential, square root)
Preset key can be customized for user settings or factory "defaults"
Security Erase mode
High Speed hardware based Pass/ Fail function
Large 7 inch TFT-LCD display with 800*480 resolution
Multiple interface types: USB Host, USB Device (USB-TMC), LAN, Trigger Out
Supports SCPI remote control commands
Supports Multi-language display and embedded online help
Bode plot
Search and navigate
Web Browser based control
Functions and Characteristics
Record Length
Up to 14 Mpts (single channel/pair mode), 7 Mpts/CH (two channels/ pair mode). Using hardware-based Zoom technologies and max record length of up to 14 Mpts, users are able to over-sample to capture longer time periods at higher resolution and use the zoom feature to see more details within each signal.
Excellent Sample Rate
Two channel series have one 1 GSa/s ADC, four channel series have two 1 GSa/s ADCs. When all channels are enabled, each channel has a maximum sample rate of 500 MSa/s. When a single channel per ADC is active, it has sample rate of 1 GSa/s.
Waveform Capture Rate
With a waveform capture rate of up to 400,000 wfm/s (sequence mode), the oscilloscope can easily capture the unusual or low-probability events.
High Speed Technology
Waveform capture rate up to 100,000 wfm/s (normal mode), and 400,000 wfm/s sequence mode
Supports 256-level intensity grading and color display modes Record length up to 14 Mpts
Math Functions
FFT, addition, subtraction, multiplication, division, integration, differential, square root which enables speedy extraction of results from waveforms and measurements.
256-Level Intensity Grading and Color Temperature Display
New display technology provides for fast refresh rates. The resulting intensity-graded trace is brighter for events that occur with more frequency and dims when the events occur with less frequency.
Automatic Measurements
Up to 38 parameters which include Measurement Statistics, Zoom, Gating, Math, History and Reference functions.
History Waveforms (History) Mode and Segmented Acquisition (Sequence)
Playback the latest triggered events using the history function. Segmented memory collection will store trigger events into multiple (up to 80,000) memory segments, each segment will store triggered waveforms and timestamp each frame.
Gate and Zoom Measurement
Through Gate and Zoom measurement, the user can specify an arbitrary interval of waveform data analysis and statistics. This helps avoid measurement errors that can be caused by invalid or extraneous data, greatly enhancing the measurements' validity and flexibility.
Multiple Interface Types
USB Host, USB Device (USB-TMC), LAN, Trigger Out thus allowing users to save data for external analysis and screen images for reports.
Included
Oscilloscope
Certification
Passive Probe
USB Cable
Power Cord
Quick Start
Specifications
Bandwidth
200 MHz
Sampling Rate (Max.)
Two 1 GSa/s ADCs
Channels
4
Memory Depth (Max.)
7 Mpts/CH (not interleave mode)
14 Mpts/CH (interleave mode)
Waveform Capture Rate (Max.)
100,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode)
Trigger Type
Edge, Slope, Pulse Width, Window, Runt, Interval, Dropout, Pattern, Video
Serial Trigger and Decoder (Standard)
IIC, SPI, UART/RS232, CAN, LIN
I/O
USB Host, USB Device, LAN, Pass/Fail, Trigger Out, Sbus
Display
7" TFT-LCD (800 x 480)
Electromagnetic Compatibility
2004/108/EC
Execution Standard EN 61326-1:2006
EN 61000-3-2:2006 + A2:2009, EN 61000-3-3:2008
Safety
2006/95/EC
Execution Standard EN 61010-1:2010 / EN 61010-2-030:2010
Power Supply
Input Voltage: 100 to 240 VAC, CAT II, Auto selection
Frequency: 50/60/400 Hz
Power: 25 W Max
Dimensions
12.28 x 5.22 x 5.94" (312 x 132.6 x 151 mm)
Weight
5.73 lbs (2.6 kg)
Terms & Conditions
Item Condition:
Unless specified otherwise all products listed are Brand New in the original factory packaging and include a full factory warranty.
Shipping:
We currently only ship to U.S. buyers. We ship items within one or two business days from payment. We do not process shipments on weekends and holidays. Local pick up is not available. We only ship to addresses verifiable by either PayPal or credit card issuing bank.
Please note that we cannot alter the address once a purchase is made. In the case of PayPal payment, we will ship orders when the payment is marked “Eligible” for PayPal Seller’s protection.
*Shipping Rates are for Continental US, Please Contact us for other US Destinations
Payment:
Currently all payments must be made directly though PayPal
Sales Tax:
We are required to charge sales tax in North Carolina
Return Policy:
If for any reason you are not 100% satisfied with a product you receive from us, you may return the regular stock product within 30 days from the time of receipt, for a full refund or exchange of the product you purchased (less any shipping costs). Within this time, products may be returned; freight prepaid and must be in their original packaging and in resalable condition.
Shipping errors, missing items or damages must be reported to us immediately (damages should be accompanied by a signed bill of lading acknowledging the damage). Items returned will be inspected for damage or misuse at which time they may be subject to restocking fees, other fees or refused, prior to the issuance of any credit.