-40%

Tektronix TDS5054B 500MHz 5GS/s oscilloscope 3M CAN LIN SM USB PWR JIT 18 SSD

$ 659.47

Availability: 100 in stock
  • All returns accepted: Returns Accepted
  • Restocking Fee: No
  • Brand: Tektronix
  • Refund will be given as: Money Back
  • Return shipping will be paid by: Buyer
  • Maximum Bandwidth: 500 MHz
  • Country/Region of Manufacture: United States
  • MPN: TDS5054B
  • Model: TDS5054B
  • Oscilloscope Type: Digital Phosphor Oscilloscope (DPO)
  • Number of Channels: 4
  • Features: With USB
  • Installed Options: CAN LIN 18 JITTER 3M SM USB PWR ETH SSD
  • Maximum Real-Time Sampling Rate: 5 GSa/s
  • Condition: Fully functioning as it should be. 16GB SSD disk drive. See pictures for cosmetic condition.
  • Item must be returned within: 60 Days

    Description

    Up for sale is a Tektronix 4 channel TDS5054B 500MHz 5GSa/s oscilloscope in fully functional condition.
    The standard rotating media hard drive was replaced with a 16GB Sandisk solid state SATA disk drive (SSD) so no worries about the heads crashing in this scope when subjected to vibration or jarring! Additionally, it boots faster now as well.
    The scope has the following hard options:
    3M: Extends standard acquisition length from 50,000 points per channel to 4 million samples on three or four channels, 8 million samples on two channels, and 16 million samples on one channel.
    18 Touch screen.
    Other soft options as shown in the pictures.
    JA3 JE3 J2 SM USB PW3 ETH CAN LIN
    The O/S is Windows 2000 with 1GB of DRAM. The 16GB solid state disk drive (SSD) has been wiped, with a fresh install of Windows and the standard Tektronix scope software.
    The scope passes all of its extended self tests from the utility menu and calibration routines including signal path compensation (SPC, numerous times to be sure), and is working perfectly on all 4 channels. Bandwidth (-3dB point) tested to 500MHz. GPIB, LAN, CDROM, touch screen, and USB are all tested and working.
    There are no accessories, power cords, or probes included with this scope.
    Returns accepted only if the tamper seal has not been broken or will not pass a calibration should you choose to have a calibration done. I will only ship to verified addresses in the continental United States.
    Your positive feedback is very important to me, if you have any problems, please contact me for resolution before leaving negative feedback or opening a case against me. I will work any problems out to your satisfaction.
    If you have any questions feel free to contact me and I will usually reply within one day or less. Thank you for looking.
    LOC2057