Owon HDS2062M Oscilloscope

Description

Classic Scopemeter (Digital storage oscilloscope + Digital Multimeter). DSO: Two channels; bandwidth 60MHz; sample rate (Real time) 250MSa/s; record length 6K points on each channel; cursor and automeasurement (20 types); trigger type: edge, video; Math; FFT; peak detect and average. DMM: 3¾ digits; VDC, VAC, DC, AC, resistance, capacitance, diode test, on-off test. Display: 3.8'' color LCD, TFT screen, 320×240 pixels. 110-220V; Dimensions: 7.1x4.5x1.6in/180x115x40mm. Weight: 22.8oz/645g
Input
Input coupling: DC, AC, Ground
Input impedance:1MΩ±2% connected in parallel with 15pF±5pF
Probe attenuation coefficient: 1X, 10X, 100X, 1000X
Max. Input voltage: 400V (peak)
Channel delay time (typical): 150ps
Horizontal
Sampling rate range: 0.25Sa/s~250MSa/s
Waveform interpolation: sin(x)/x
Record length: 6K points on each channel
Scanning speed range (s/div): 5ns/div~100s/div, stepping in the 1-2-5 mode
Sampling rate and delay time accuracy: ±100ppm (any time interval which is equal to or larger than 1ms)
Time interval (ΔT)measurement accuracy (full bandwidth): Single: ±(1 sampling interval time +100ppm × reading+0.6ns) > average 16: ±(1 sampling interval time +100ppm × reading+0.4ns)
Vertical
Analog digital converter (A/D):
With the resolution of 8 bits, make sampling on both channels synchronously.
Sensitivity range (V/div):
5mV/div~5V/div (at the input BNC)
Displacement range: ±2V (5mV/div~200mV/div), ±50V (500mV/div~5V/div)
Analog bandwidth: 60MHz
Single bandwidth: Full bandwidth
Low frequency response (AD coupling, -3dB): ≥5Hz (at the BNC).
Rise time (typical one at the BNC):
≤5.8ns
DC gain accuracy: ±3%
DC measurement accuracy (average value sampling mode):
The voltage difference (ΔV) between any two points on the waveform after averaging the captured waveforms more than 16: ±(5% reading+0.05divisions)
Trigger
Trigger sensivity
(Edge)
DC coupling 1div (DC~full bandwidth)
AC coupling Same as the DC coupling when it is equal to or larger than 50Hz
Triggering level range ±6 divisions from the screen center
Triggering level accuracy (typical) which is applicable to the signal with rise and fall time equal to or longer than 20ns ±0.3 divisions
Trigger displacement 655 divisions for pre-triggering and 4 divisions for post-triggering.
Trigger Holdoff range 100ns~10s
Make a 50% level setting (Typical). Operation with the input signal frequency equal to or larger than 50Hz.
Trigger sensitivity (Video triggering and typical mode) 2 divisions of peak-to-peak value
Signal system and line/field frequency (Video triggering mode); Support the NTSC, PAL and SECAM broadcasting systems of any field or line frequency