Hantek DSO5072P DSO5102P DSO5202P Digital Oscilloscope 70-200MHz 1GSa/s 2CH 40K

Description

Store category
Sign Up Now !
You may also like
Hantek DSO5072P DSO5102P DSO5202P Digital Oscilloscope 70-200MHz 1GSa/s 2CH 40K
Product Description
Brand
Hantek
UPC
Does not apply
MPN
Does Not Apply
ISBN
Does not apply
Model
DSO5072P / DSO5102P/DSO5202P
Channel
2 Channels
Bandwidth
70MHz / 100MHz/200MHz
Sampling Rate
1GSa/s
Equivalent Sample Rate
25GSa/s
Power Adapter
100-240V 50/60Hz
Plug Type
AU / US / EU (All Included)
Battery
1 * 727076 Lithium Battery
Current
4500mAH
Voltage
7.4V
Material
ABS
Country/Region of Manufacture
China
Sample Rate
1GSa/s - 1.9GSa/s
Poduct Details
DSO5000P Series
Bandwidth:70-200MHz;
1GSa/s Real Time Sample Rate;
Record length up to 40K;
Multiple automatic measurements;
Large (7.0-inch) color display, WVGA(800x480);
Trigger mode: edge/pulse width/line selectable video/slop/overtime etc.
Feature:
200/100/70MHz bandwidths
1GSa/s Real Time sample rate
Large (7.0-inch) color display, WVGA(800x480)
Record length up to 40K
Trigger mode: edge/pulse width/line selectable video/slop/overtime etc.
USB host and device connectivity, standard
Multiple automatic measurements
Four math functions, including FFTs standard
Provides software for PC real-time analysis
Function Picture:
Parameters
Comparison
Accessories
Download
Model
DSO5202P
DSO5102P
DSO5072P
Acquisition
Sample Rate
Real-Time Sample: 1GS/s
Equivalent Sample: 25GS/s
Acquisition Modes
Normal
Normal data only
Peak Detect
High-frequency and randon glith capture
Average
Wavefom Average, selectable 4,8,16,32,64,128
Inputs
Inputs Coupling
AC, DC, GND
Inpits Impendance
1MΩ±2% ‖20pF±3pF
Probe Attenuation
1X, 10X
Supported Probe Attenuation Factor
1X, 10X, 100X, 1000X
Maximum Input Voltage
CAT I and CAT II: 300VRMS (10×), Installation Category;
CAT III: 150VRMS (1×);
Installation Category II: derate at 20dB/decade above 100kHz to 13V peak AC at 3MHz* and above. For non-sinusoidal waveforms, peak value must be less than 450V. Excursion above 300V should be of less than 100ms duration. RMS signal level including all DC components removed through AC coupling must be limited to 300V. If these values are exceeded, damage to the oscilloscope may occur.
Horizontal
Sample Rate Range
500MS/s--1GS/s
Waveform Interpolation
(sin x)/x
Record Length
40K
SEC/DIV Range
2ns/div to 40s/div
4ns/div to 40s/div
Sample Rate and
Delay Time Accuracy
±50ppm（at over any ≥1ms time interval)
Position Range
2ns/div to 10ns/div;
(-4div x s/div) to 20ms;
20ns/div to 80us/div; (-8div x s/div) to 40ms;
200us/div to 40s/div; (-8div x s/div) to 400s
Delta Time Measurement Accuracy
(Full Bandwidth)
Single-shot, Normal mode:± (1 sample interval +100ppm × reading + 0.6ns);
>16 averages:± (1 sample interval + 100ppm × reading + 0.4ns);
Sample interval = s/div ÷ 200
Vertical
Vertical Resolution
8-bit resolution, all channel sampled simultaneously
Position Range
2mV/div to 200mV/div, ±2V
200mV/div to 5V/div, ±50V
Bandwidth
200MHz
100MHz
70MHz
Rise Time at BNC( typical)
1.8ns
3.5ns
5ns
Analog Bandwidth in Normal and Average modes at BNC or with probe, DC Coupled
2mV/div to 20mV/div, ±400mV; 50mV/div to 200mV/div, ±2V
500mV/div to 2V/div, ±40V; 5V/div, ±50V
Math
+, -, *, /, FFT
FFT
Windows: Hanning, Flatop, Rectamgular, Bartlett, Blackman;
1024 sample point
Bandwidth Limit
20MHz
Low Frequency Response (-3db)
≤10Hz at BNC
DC Gain Accuracy
±3% for Normal or Average acquisition mode, 5V/div to 10mV/div;
±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div
DC Measurement Accuracy,
Average Acquisition Mode
When vertical displacement is zero, and N ≥16:± (3% × reading + 0.1div + 1mV) only 10mV/div or greater is selected;
When vertical displacement is not zero, and N≥16: ± [3% × (reading + vertical position) + 1% of vertical position + 0.2div]; Add 2mV for settings from 2mV/div to 200mV/div; add 50mV for settings from 200mV/div to 5V/div
Volts Measurement Repeatability,
Average Acquisition Mode
Delta volts between any two averages of ≥16 waveforms acquired under same setup and ambient conditions
Trigger System
Trigger Types
Edge, Video, Pulse, Slope, Over time, Alternative
Trigger Source
CH1, CH2, EXT, EXT/5, AC Line
Trigger Modes
Auto, Normal, Single
Coupling Type
DC, AC, Noise Reject, HF Reject, LF Reject
Trigger Sensitivity
(Edge Trigger Type)
DC(CH1,CH2):
1div from DC to 10MHz; 1.5div from 10MHz to 100MHz; 2div from 100MHz to Full;
DC(EXT):
200mV from DC to 100MHz; 350mV from 100MHz to 200MHz;
DC(EXT/5):
1V from DC to 100MHz;1.75V from 100MHz to 200MHz;
AC: Attenuates signals below 10Hz;
HF Reject: Attenuates signals above 80kHz;
LF Reject: Same as the DC-coupled limits for frequencies above 150kHz; attenuates signals below 150kHz
Trigger Level Range
CH1/CH2: ±8 divisions from center of screen;
EXT: ±1.2V;
EXT/5:±6V
Trigger Level Accuracy( typical)Accuracy is for signals having rise and fall times ≥20ns
CH1/CH2: 0.2div × volts/div within ±4 divisions from center of screen;
EXT: ± (6% of setting + 40mV);
EXT/5: ± (6% of setting + 200mV);
Set Level to 50%(typical)
Operates with input signals ≥50Hz
Video Trigger
Video Trigger Type
CH1, CH2: Peak-to-peak amplitude of 2 divisions;
EXT: 400mV;
EXT/5: 2V
Signal Formats and Field Rates, Video Trigger Type
Supports NTSC, PAL and SECAM broadcast systems for any field or any line
Holdoff Range
100ns ~ 10s
Pulse Width Trigger
Pulse Width Trigger Mode
Trigger when (< , >, = , or ≠); Positive pulse or Negative pulse
Pulse Width Trigger Point
Equal: The oscilloscope triggers when the trailing edge of the pulse crosses the trigger level.
Not Equal: If the pulse is narrower than the specified width, the trigger point is the trailing edge. Otherwise, the oscilloscope triggers when a pulse continues longer than the time specified as the Pulse Width.
Less than: The trigger point is the trailing edge.
Greater than (also called overtime trigger): The oscilloscope triggers when a pulse continues longer than the time specified as the Pulse Width
Pulse Width Range
20ns ~ 10s
Slope Trigger
Slope Trigger Mode
Trigger when (< , > , = , or ≠ ); Positive slope or Negative slope
Slope Trigger Point
Equal: The oscilloscope triggers when the waveform slope is equal to the set slope.
Not Equal: The oscilloscope triggers when the waveform slope is not equal to the set slope.
Less than: The oscilloscope triggers when the waveform slope is less than the set slope.
Greater than: The oscilloscope triggers when the waveform slope is greater than the set slope.
Time Range
20ns ~ 10s
Overtime Trigger
Over Time Mode
Rising edge or Falling edge
Time Range
20ns ~ 10s
Alternative Trigger
Trigger on CH1
Internal Trigger: Edge, Pulse Width, Video, Slope
Trigger on CH2
Internal Trigger: Edge, Pulse Width, Video, Slope
Trigger Frequency Counter
Readout Resolution
6 digits
Accuracy (typical)
±30ppm (including all frequency reference errors and ±1 count errors)
Frequency Range
AC coupled, from 4Hz minimum to rated bandwidth
Signal Source
Pulse Width or Edge Trigger modes: all available trigger sources
The Frequency Counter measures trigger source at all times, including when the oscilloscope acquisition pauses due to changes in the run status, or acquisition of a single shot event has completed.
Pulse Width Trigger mode: The oscilloscope counts pulses of significant magnitude inside the 1s measurement window that qualify as triggerable events, such as narrow pulses in a PWM pulse train if set to < mode and the width is set to a relatively small time.
Edge Trigger mode: The oscilloscope counts all edges of sufficient magnitude and correct polarity.
Video Trigger mode: The Frequency Counter does not work.
Measure
Cursor Measurement
Voltage difference between cursors: △V
Time difference between cursors: △T
Reciprocal of △T in Hertz (1/ΔT)
Auto Measuerment
Frequency, Period, Mean, Pk-Pk, Cycli RMS, Minimum, Maximum, Rise time, Fall Time, +Pulse Width, -Pulse Width, Delay1-2Rise, Delay1-2Fall, +Duty, -Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, Preiod Mean, Preiod RMS, FOVShoot, RPREShoot, BWIDTH, FRF, FFR, LRR, LRF, LFR, LFF
Display
Display Type
7 inch 64K color TFT (diagonal liquid crystal)
Display Resolution
800 horizontal by 480 vertical pixels
Display Contrast
Adjustable (16 gears) with the progress bar
Probe Compensator Output
Output Voltage( typical)
About 5Vpp into ≥1MΩ load
Frequency(typical)
1kHz
Power Supply
Supply Voltage
100-120VACRMS(±10%), 45Hz to 440Hz, CATⅡ
120-240VACRMS(±10%), 45Hz to 66Hz, CATⅡ
Power Consumption
<30W
Fuse
2A, T rating, 250V
Environmental
Temperature
Operating: 32℉ to 122℉ (0℃ to 50℃);
Nonoperating: -40℉ to 159.8℉ (-40℃ to +71℃)
Cooling Method
Convection
Humidity
+104℉ or below (+40℃ or below): ≤90% relative humidity;
106℉ to 122℉ (+41℃ to 50℃): ≤60% relative humidity
Altitude
Operating: Below 3,000m (10,000 feet);
Nonoperaring: Below 15,000m(50,000 feet)
Mechanical
Size
Length 385mm, Width 200mm, Height 245mm
Weight
3.5KG(with Packing); 2.08KG(without Packing）
Detailed technical index please refer to
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
1. We reserve all right to refuse high bidders having negative, hidden feedback, all non-registered bidders or bidder with unpaid history.
2. We accept
PAYPAL PAYMENT ONLY !
3. If you paid by e-cheque via Paypal, we will send the item(s) to you after the payment was cleared. It normally takes 5-7 business days for payment processing.
4. Payment is expected to be completed within 3 days after auction closed. Unpaid auction will be forfeited and eBay may suspend unpaid buyer account.
Delivery details
Your order will be shipped within 1-2 business days once we receive your payment.
If you pay by e-check, we will ship your order once your payment is cleared.
Delivery address on ebay ,Please make sure payment address in ebay is correct. Any non-received items caused by invalid address registered on Paypal are not in our full refund or replacement policy.
Normally, you should receive item within 2-4 weeks. Email us first if not receive items after 40 working days after full payment sent
Sometimes the package maybe stay at customs for long time or delayed by public holidays and bad weather,Please understand this international Shipping
Country
Delivery Time
Working Days
(not including holiday)
5-7
8-11
12-14
15-19
20-22
>22
Working Days + Saturday + Sunday
5-9
10-15
16-20
21-25
26-30
>31
United States
Rate (item arrived)
5 .1%
50.1%
29.6%
10.5%
4.7%
Refund
United Kingdom
Rate (item arrived)
9.9%
63.2%
19.1%
3.4%
4.4%
Refund
Australia
Rate (item arrived)
21.4%
50.0%
14.3%
7.2%
7.1%
Refund
France
Rate (item arrived)
10.5%
28.6%
43.8%
10.1%
7.0%
Refund
Germany
Rate (item arrived)
11.1%
22.2%
30.3%
20.9%
15.5%
Refund
Canada
Rate (item arrived)
0.0%
47.
1
%
31.4%
17.6%
3.9%
Refund
Spain
Rate (item arrived)
3.5%
25.0%
47.9%
12.9%
10.7%
Refund
We do not ship on weekend or public holidays.
We do not offer combined shipping discount unless
othe
rwise specified in the auction
.
International buyers – Please Note :
Import duties, taxes and charges
are not included in the item price or shipping charges. These charges are the buyer's responsibility
Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying
These charges are normally collected by the delivering freight (shipping) company or when you pick the item up – do not confuse them for additional shipment charges
All transport costs are set according to the DHL / FEDEX, but does not include Remote Area surcharge and any customs fees. Remote areas of inquiry, please click the DHL Web.
Enter your country and postal code to check it, if your location are remote area,DHL company will charge Remote surcharge,the amount we will inform you at the first time, the amount depend on the package weight and Parcel size,hope for your understanding and pay the extra fees early. if so your item will be shipped out asap.
Some countries have been excluded, to obtain shipping prices, please contact us through EBAY message
Terms of sales
For customers who purchase items which enjoy Money Back Policy, please kindly read the terms and conditions below before returning:
1.The item must be returned in original resaleable condition with all tags and packaging .
2.DO NOT stick or write anything on the item itself or its packaging.Please only write or place postage stickers on the outer postage packaging.
3.It would be at the buyer’s own cost to return the unwanted item.
4.
The refund would be processed after the item is received by our warehouse staff, which is confirmed to be unopened and in good condition.
If you ask for replacement or repair after one month since you paid, you need to pay for the 2nd shipping cost & handling
.
If you have to return the item for the refund, you will pay a 20 % restocking fee.
5.Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying,
If because the tariff or customs clearance in your country lead to return goods back, and reject the receipt or not with the customs clearance, we do not refund your paykment.
About us
1. We hope to received you 5 star positive feedback when you get the item.
2.
Our mission:
To provide our customers the tops quality products with good price, fast shipping and best service.
Contact us
If you have any questions, please contact us through ebay mail (click contact seller). We will reply you immediately.
Please believe us before you open case, or leave neutral and negative feedback, we will offer good solutions to any problems.
Feedback