FLUKE PHILIPS PM3094 200 MHZ OSCILLOSCOPE 4 CHANNEL 2 PROBES TESTED WORKING

Description

You are bidding on one FLUKE PHILIPS PM3094 200 MHZ OSCILLOSCOPE 4 CHANNEL with 2 PROBES and power cord. Good used tested working condition. Powers up as you can see. We have 6 and price is for 1 oscilloscope with 2 probes and power cord. 4 have IEE 488 options and 2 don't. Only 4 have the front cover. Backup battery terminals have some corrosion. Batteries are not included. No other parts included. Please look at the pics for details. Sold as is in a pictured described S&h cost to lower 48 states only. International shipping via USPS priority mail paid buy buyer.
You are bidding on
one
FLUKE PHILIPS PM3094 200 MHZ OSCILLOSCOPE 4 CHANNEL with 2 PROBES and power cord
.
Good used tested working condition.
Powers up as you can see.
We have 3 and price is for 1 oscilloscope with 2 probes and power cord.
1 have IEE 488 options and 2 don't. Only 1 have the front cover. Backup battery terminals have some corrosion. Batteries are not included. No other parts included. Please look at the pics for details.
Sold as is in a pictured described
S&h cost to lower 48 states only.
International shipping via USPS priority mail paid buy buyer.
Please E-mail me if you have any questions,
it is FREE
.
DESCRIPTION:
FLUKE PM3094 Autoset and Autocal Autoset Selects proper channel, time-base and trigger settings. Function can be customized. Autocal Automatic fine adjustment for enhanced accuracy to get optimal performance even under extreme environmental conditions Vertical Deflection Input Channels (PM3084/94): Four fully attenuated channels (PM3082/92): Two fully attenuated channels, plus two limited attenuated channels (2+2). Frequency Response (PM3092/94): DC to > 200 MHz (PM3082/84): DC to > 100 MHz Display Modes CH1, (-)CH2, CH3, (-)CH4, Add: CH1 & (-)CH2, CH3 & (-)CH4 In ALTernate or CHOPped mode. Bandwidth Limiter 20 MHz -3 db All All Rise Time (Calculated) (PM3092/94): < 1.75 ns (PM3082/84): < 3.50 ns Deflection Coefficient CH1 & CH2 (all models): 2 mV/div to 5 V/div in a 1-2-5 Sequence or continuously calibrated control, 2 mV/div to 12.5 V/div Ch3 & Ch4 (PM3082/92): 0.1 V/div and 0.5 V/div only Ch3 & Ch4 (PM3084/94): 2 mV/div to 5 V/div in a 1-2-5 Sequence or continuously calibrated control, 2 mV/div to 12.5 V/div Error Limit 1.3% measured over 6 central vertical divisions. Input Impedance 1 & ±1% // 2 pf and 50& (PM 3094 and CH1 & CH2 of PM 3092) Max. Rated Input Voltage In 1 M& position: 150 Vrms CAT III In 50& position: 5 Vrms; 50 V ac peak (max of 50 m Joules during any 100 ms interval) Horizontal Deflection Display Modes Main TB and/or Delayed TB, X-deflection. Main Time Base Time Coefficients: (PM 3092/94) 0.5 s/div to 20 ns/div in a 1-2-5 sequence, 1.25 s/div to 20 ns/div continuously calibrated control. (PM 3082/84) 0.5 s/div to 50 ns/div in a 1-2-5 sequence, 1.25 s/div to 50 ns/div continuously calibrated control. Error Limit (magn 1X): ±(1.3% of reading + 0.5% of 8 divisions) Hold Off: Up to 20 divisions of MTB setting (max 2 sec) Delayed Time Base Time Coefficients: (PM 3092/94) 0.5 ms/div to 20 ns/div in a 1-2-5 sequence. (PM 3082/84) 0.5 ms/div to 50 ns/div in a 1-2-5 sequence. Fastest Sweep: (PM 3092/94) 2 ns/div (magn 10X) (PM 3082/84) 5 ns/div (magn 10X) Error Limit (magn 1X): ±(1.3% of reading + 0.5% of 8 divisions) Trace Separation: ±34 div Triggering (MTB & DTB) Trigger Modes Auto free run, Triggered, Single, Edge triggering, TV triggering Edge Triggering MTB Trigger Source: CH1 to CH4, Composite, Line(Mains) DTB Trigger Source: CH1 to CH4, TV-Line Slope: Positive or Negative Coupling: DC, AC (10 Hz), Lf-rej (30 kHz), Hf-rej (30 kHz) Level Range: ±8 div or level within signal peak to peak range. Level Indication: On screen level indicators and numeric readout. Trigger Sensitivity: (PM 3092/94) 0.5 div up to 100 MHz, 1.0 div up to 200 MHz, 2.0 div up to 300 MHz (PM 3082/84) ) 0.5 div up to 50 MHz, 1.0 div up to 100 MHz, 2.0 div up to 200 MHz TV Triggering Video Standard: HDTV, NTSC, PAL, SECAM standards MTB Trigger Source: CH1 to CH4, Field1, Field2, TV-Line Signal Polarity: Positive or Negative Sensitivity: 0.7 div (Sync Pulse) X Deflection Deflection Source CH1 to CH4, Line(Mains) Deflection Coefficient See vertical deflection Dynamic Range 20 div up to 100 kHz, > 10 div up to 2 MHz Frequency Response 2 MHz -3db Error Limit 5% measured over central 6 divisions Phase Shift < 3o up to 100 kHz Cursor Measurements Cursor Modes Manual positioning: Horizontal, Vertical, Both Auto Positioning: Vp-p or 10-90% or 20-80% Auto Positioning Vp-p or 10-90% or 20-80% Readout Vertical: dV, V1&V2 to GND, Ratio Horizontal: dt, 1/dt (in Hz), Ratio, Phase Auto Positioning: Vpp, Vp+&Vp- to GND, Vdc and Trise Accuracy (magn 1X) ±1% of full scale. Within the central 8 horizontal and 6 vertical divisions for manual cursor positioning. Interfaces RS 232C 9 Pin D.Connector GPIB/IEEE 488.2 Factory installed option, SCPI Protocol Power Supply Line Voltage 100V to 240V (±10%) CAT II Line Frequency 50 Hz to 400 Hz (±10%) Power Consumption 60W (80W with all options installed) Mechanical Data Size (excluding handle & feet) 139 mm H x 341 mm W x 481 mm L 5.5 in. H x 13.4 in. W x 18.9 in. L Weight 8.5 kg 20 lb.
Pictures sell!
Auctiva offers Free Image Hosting and Editing.
The complete eBay Selling Solution.
Track Page Views With
Auctiva's FREE Counter