DSO328 LCD Oscilloscope Digital Tester 1Msps Bandwidth Replace DSO138 DSO311

Description

Product Overview
DSO328 LCD Oscilloscope Digital Tester 1Msps Bandwidth Replace DSO138 DSO311
Overview:
This mini oscilloscope is designed for electronic hobbyists to learn about electronics, soldering, programming and STM32. It contains main controller board, TFT LCD and other electronic components to DIY a functional mini digital oscilloscope.
Features:
Use STM32 Chip. It runs faster than DSO138 and a good handle of data.
Pre-programmed. The controller board is programmed and tested before leaving factory. It is high quality and safe to use.
Full of Fun. It is a soldered Product
With Cool Black Case. Unlike DSO138, this DSO328 is with a cook black case, which makes it convenient to use in teaching and testing.
Notice: This oscilloscope requires DC 9V 200mA power supply (no more than 10V,or it may be burned)
Specification:
§ Input impedance: 1MΩ
§ Analog Bandwidth: 0 – 200 KHz
§ Maximum input voltage: 50Vpp (1: 1 probe), 400Vpp (10: 1 probe)
§ Maximum real-time sampling rate: 1Msps
§ Comes 1Hz /3.3V square wave test signal source
§ Accuracy: 12Bit
§ Sampling buffer depth: 1024 bytes
§ Vertical Sensitivity: 5mV/Div – 20V/Div
§ Adjustable vertical displacement, and with instructions
§ Coupling modes: DC / AC / GND
§ The horizontal time base range: 10μs / Div - 50s / Div (1-2-5 progressive manner)
§ With automatic, regular and one-shot mode, easy to capture the moment waveform
§ Available rising or falling edge trigger
§ Adjustable trigger level position, and with instructions
§ Observable previous trigger waveform (negative delay)
§ Can freeze at any time waveform display (HOLD function)
Display and Control
Connection:
§ Power Supply: DC 8V-10V, recommend DC 9V, no more than 10V
§ Probe: connect the probe to BNC
Operation:
Button Functions:
【V/DIV】: Selection for Sensitivity and Vertical position
【SEC/DIV】: Selection for time base and horizontal position,
【TRIGGER】: Selection for Trigger mode, Trigger Level or Trigger Edge
【OK】: Press once to entert HOLD function, second press to exit HOLD function
【ADJ】: Arrow key, turn left and right to select parameters Selected parameter will be highlighted
【COUPLING SWITHC】: Coupling can be switched to DC, AC or GND. When it is switched to GND, the oscilloscope’s input is disconnected from external input and is connected to the ground, aka input is 0 V
Additional Functions:
Vertical position alignment Switch to GND：press【V/DIV】for 3 seconds
Parameter bar turn on/off：Press【OK】for 3 seconds to turn on/off the parameter bar.
Save waveform:Press 【OK】and 【TRIGGER 】at the same time, current waveform will be saved in EEPROM; the original data will be replaced.
Read waveform:Press【OK】and【SEC/DIV】at the same time, it can read the waveform saved in EEPROM; it is showed in HOLD mode.
Reset to default setting:Press【SEC/DIV】and【TRIGGER】for 3 seconds
Horizontal position centered:Press【SEC/DIV】for 3 seconds, horizontal position will be in the center of waveform buffer
Trigger level centered:Press【TRIGGER】for 3 seconds, Trigger level will be in the center of Signal amplitude.
Probe-compensated adjustment:
Adjust trimmer capacitor C3 and C5:
a) Connect the probe’s RED clip to signal output terminal, black clip not connected
b) Power on the oscilloscope to start, press【ADJ】knob for 3 seconds. Tthe bottom of the screen shows the output of the test signal amplitude, and then press【ADJ】 to adjust amplitude to 0.1V.
c) Set sensitivity to 50mV, adjust trigger level to make the waveform stable.
d) Adjust C3 to make the waveform right-angled. C3 adjustment is finished.
e) Press【ADJ】to adjust amplitude to 3.3V, and set sensitivity to 1V, adjust C5 to make the waveform right-angled.
Package included:
1*DSO328 LCD Digital Oscilloscope Tester 1Msps 200KHz Bandwidth Replace DSO138 DSO311
Shipping Policy
Item Location
Payment Mathord
Returns Policy
About Feedback
Shipping Policy
1. We Ship to Worldwide
2. We ship your orders within 1-2 business days after the payment cleared.
3. Item shipped from China via china Post Airmail, reach most of the countries within 2 to 4 weeks.
4. Delivery time depends on destination and other factors, it may takes up to 20 days. If you don't receive
the item after 25 days,please keep in touch with us, we'll investigate and solve the delivery problem.
5. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges
are the buyer's responsibility. Please check with your country's customs office to determine what these
additional costs will be prior to bidding or buying.
Item Location
ShenZhen
Payment Mathord
1. We accept PAYPAL only.
2. Payment must be made within 7 days of auction closing (Unpaid dispute will automatically open when item
is not paid in 7 days).
3. PLEASE NOTE: SHIPPING&HANDING DOES NOT INCLUDE DUTIES, LOCATL TAXES OR ANY OTHER IMPORTATION FEES.
4. Please list your special requests (color, packages, value of declaration, etc.) in the EBAY NOTES SECTION
when you make payment
Returns Policy
1. Customer satisfaction is our top goal. All products are quality checked. They are new and in good
condition when shipped to our customers. If product is defective or damage upon arrival, or wrong
product shipped, please keep in touch with us immediately. Returns accepted within 14 days of delivery date
and item must be in original new condition, not worn or altered in any way with attached tags & wrap.
Otherwise deal is final. Return shipping must be paid by buyer.
2. Please keep in touch with us first if you have anyproblems/questions/concerns. We will be happy to resolve
any issues you may have in a cordial and friendly manner.
3. We appreciate your Positive Feedback, and will do the same in return. PLEASE DO NOT leave
negative feedback without first communication with us. Please allow max 24 HOURS for us to respond
About Feedback
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is
very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or
negative feedback, so that we can satisfactorily address your concerns.It is impossible to address
issues if we do not know about them!