Assembled DSO150 Digital Oscilloscope 2.4" LCD Display With Case Test Clip Power

Description

Descriptions:
With automatic, regular and single trigger modes, it is convenient to capture instant waveforms.
Can be triggered by rising or falling edge.
Trigger level position is adjustable, with indication
Observe the waveform before the trigger (negative delay).
Freeze waveform display at any time (HOLD function).
Comes with 1KHz /3.3V square wave test signal source.
With digital display of waveform parameters, the parameters that can be displayed are: frequency, period, pulse width, duty cycle, maximum value, minimum value, average value, peak-to-peak value, effective value.
Save/recall the waveform, the waveform does not disappear when turned off.
Bullet Point:
1. Genuine DSO150 oscilloscope, a perfect replacement for the old DSO138.
2. It is made by improving the circuit, circuit board, mechanical structure and operation mode, and has improved performance than DSO138.
3. Broadened the sensitivity range than DSO138.
4. The oscilloscope adopts rotary coding switch, which makes parameter adjustment more convenient and quicker than DSO138,
5. This product is a finished product, it can be used when it is bought, not a part that needs to be assembled.
Specification:
The highest real-time sampling rate: 1Msps
Precision: 12Bit
Sampling buffer depth: 1024 bytes
Analog bandwidth: 0-200KHz
Vertical sensitivity: 5mV/Div – 20V/Div (according to the 1-2-5 way)
Adjustable vertical displacement, with instructions
Input impedance: 1MΩ
Maximum input voltage: 50Vpp (1:1 probe), 400Vpp (10:1 probe)
Coupling methods include: DC/AC/GND
Horizontal time base range: 10μs/Div-50s/Div (increase by 1-2-5)
Package included:
1 x fully assembled digital oscilloscope
1 x BNC standard probe
1 x User Manual (English)